Snazzy FX WOW AND FLUTTER - Manual (Page 3)

PARAMETERS:
1- GAIN
2- VOLUME
3- DRY/WET CONTROL
4- THRESHOLD
5- DELAY (TIME)
6- FEEDBACK
7- DECAY
8- WARP
9- ATTACK
In order to understand how to work with the Wow and Flutter, it is first advantageous to think in terms of
what you might like to do with the Wow & Flutter. If you are simply connecting the Wow to a guitar and
plugging it into a guitar or bass amplifier, then operation can be relatively straightforward.
Some people may enjoy simply messing about with the controls until they get something musically
useful. Others may wish to understand some of the principals going on behind the scenes.
The first control we should focus on is the DRY/WET control. (#3) With this knob turned all the way to
the left, you will hear only the DRY guitar. Depending on how the rest of the controls are set, as you begin
turning this control to the right (clockwise) you will start hearing the signature “rubbery” sounds of the
wow and flutter (at long delay times) or at the very least, you will start hearing the darker character start
mixing with your brighter Clean tone.
Keep in mind that due to the filtering and modulation going on inside this box, a fully wet signal will
sound much different than the original source signal. This is intentional.