Cleaning and maintenance – Chicago Electric HARBOR FREIGHT TOOLS 98544 User Manual

Page 13

SKU 98544

For technical questions, please call 1-800-444-3353.

Page 13

Drill only as deep as necessary. Do

not drill deeper than necessary into

walls or other areas where you can-

not identify any possible hazards

behind the drilling surface.
To reduce jamming as the Bit breaks

through the workpiece, decrease the

drilling pressure when the point of the

Bit breaks through the workpiece.
When you have drilled the hole,

17.

remove the Bit from the hole while

the Cordless Drill is still running. This

prevents the Bit from getting caught

in the hole and causing damage.
Release Trigger to stop the Drill, put

18.

Direction Lever in the center position,

and remove the bit from the Drill.

CLEanIng anD

maInTEnanCE

Procedures not specifically

explained in this manual

must be performed only by a

qualified technician.

TO pREVEnT

SERIOuS InjuRY

FROm aCCIDEnTaL

OpERaTIOn: Set the Direction

Lever (38) to the center locked

position and unplug the

battery from the tool before

performing inspection,

maintenance, or cleaning

procedures.

Do not use damaged

equipment. If abnormal noise

or vibration occurs, have the

problem corrected before

further use.

BEFORE EaCH uSE,

inspect the

general condition of the tool. Check

for loose screws, misalignment or

binding of moving parts, cracked or

broken parts, damaged electrical wir-

ing, and any other condition that may

affect its safe operation.
aFTER uSE,

clean external surfaces

of the tool with clean cloth.
BEFORE EaCH uSE,

inspect the

general condition of the Cordless

Drill/Driver. Check for misalignment

or binding of moving parts, cracked

or broken parts, leaking Battery Pack,

damaged Charger wiring, chipped or

broken Drill Bits, and any other condi-

tion that may affect its safe operation.

If abnormal noise or vibration occurs,

have the problem corrected before

further use.

Do not use damaged equipment.
after each use:

With a soft brush or

cloth, remove all dirt and debris from

the Cordless Drill/Driver. Do not im-

merse the Cordless Drill/Driver in any

liquids.
The lithium battery in this tool

must be recycled or disposed of

properly.