Sevylor Colossus 1 Person Boat - Manual (Page 4)

INFLATABLE BOA
TS
®
IMPORTANT! Inflate the boat chambers in the following order:
Inflate the inside all-around safety chamber. 1.
Inflate the floor chamber(s). 2.
Inflate the bottom tunnel chambers. (Applicable models only.) 3.
Inflate the bustle chamber. (Applicable models only.) 4.
Inflate the outside main chamber. 5.
The chambers on the boat will be numbered to indicate order of
inflation also. This order of inflation will ensure the proper volume and
buoyancy of the safety chamber.
Note: To inflate the mini Double Lock™ valve, which is used on some
of the Sevylor
®
boat floors and seat bottoms, follow the same inflation
instructions above, using the mini Double Lock™ valve adapter.
The mini Double Lock™ valve adapter is included with all Sevylor
®
pumps. The adapter can be purchased from Customer Service by
calling 1-800-835-3278 (Part Number 5010000707).
CAUTION!
Water temperature and weather does affect the pressure in
inflatable products. In cold weather your product will lose some
pressure due to the fact the air will contract. If this occurs, you
may want to add a little air to improve your products performance.
However, in hot weather, the air will expand. You must let some air
out to prevent your product from failing due to overpressure. You
should avoid exposing your product to extreme temperatures (hot
or cold).
DEFLATION INSTRUCTIONS
Deflation instructions using
any
Sevylor
® QuickPump™
unit:
Deflation instructions using
the
Sevylor
® Dual Action
Hand Pump:
Remove adapter hose from inflation end and
attach to opposite deflation end of pump.
Repeat same steps as inflation. This will
draw the air out quickly. Remove adapter hose from inflation port
and attach to deflation port on pump
handle. Repeat same steps as inflation. This
will draw the air out quickly.
4