Operating instructions, Very important information, Normal operating sounds – Crosley 500 Series User Manual
Page 4: Delay start, Plate warmer, Getting started, Read before operating your dishwasher
4
Very Important
Information—
Read Before
Operating Your Dishwasher!
Normal Operating
Sounds
This dishwasher does not sound like most
dishwashers—IT’S QUIETER.
Your Precision Wash System® dishwasher
uses energy efficient motors for the wash
and drain portions of the cycle you select.
Each cycle has a series of water fills and
drains for washing and rinsing dishes. As
each cycle begins, you may–or may not–
hear the drain motor.
The next sound you will hear is the
splashing water as it enters the tub. Then the
lower arm rotates and circulates water. This
is followed by a pause and a slightly different
sound as the middle arm sprays water. If you
listen closely, you will hear the change in
sound as the wash action switches from one
arm to the other.
PLEASE BE ADVISED: If you compare
this dishwasher to previous models, you
may be surprised at what you DON’T
hear!
Operating Instructions
Vent
Latch
Delay Start
(available select
models)
Allows you to delay starting the POTS & PANS
cycle.
•
Turn dial to select number of hours.
•
Select HI-TEMP WASH ON option and
other desired options.
•
Close door to latch. The DELAY START light
(available select models) will come on.
Plate Warmer
(available select
models)
For warming dishes and serving plates before
serving hot foods:
• Load clean plates and dishes to be warmed.
• Turn dial to PLATE WARMER.
• Select HEAT DRY ON option.
Getting Started
1. Load dishwasher (See Preparing and
Loading Dishes).
Appearance may vary from your model.
2. Add detergent (See Dishwasher Dispenser
& Detergents).
3. Add rinse aid, if needed (See Rinse Aid).
4. Turn dial clockwise to select cycle (See
Cycle Chart) or number of hours for delay
start.
5. Select desired energy OPTIONS (See
Energy Options). The indicator will show red
when selected.
6. If using DELAY START, see "Delay Start."
7. For instructions on connecting the portable
dishwasher, see “Connecting and
Disconnecting the Portable/Convertible
Dishwasher.”
8. Run hot water faucet nearest dishwasher
until water is hot. Turn water off.
9. To start, close door to latch.