Sceptre X270W-1080P - Manual (Page 11)

SCEPTRE X270 Page11
Mounting Preparations
1. Place the monitor on a flat surface with cloth so the bezel does not get scratched. Unscrew the
4 screws that lock the arm to the monitor. Once the 4 screws are removed, the stand will come
off.
2. The monitor is ready for mounting.
Please note : The mounting pattern of the monitor is 100mm x 100mm using M4 metric system screws.
The screw depth of the mounting pattern should not exceed 8mm. The 4 screws removed are for
securing the monitor stand only. If you are mounting the monitor please consult a qualified installer
for further instructions on bracket support and wall support.