Connecting dvd pl, Ayer with component ypbpr, Connecting dvd player with component ypbpr – Sceptre U508CV-UMK User Manual
Page 18
- 18 -
www.SCEPTRE.com
SCEPTRE U50 UHD TV User Manual
Connecting DVD Player with Component YPbPr…
1.
Make sure the power of UHD TV and your DVD player is turned off.
2.
Obtain a Component Cable. Connect the green color connector to both your DVD player
and YPbPr’s green connector port on the back of your UHD TV.
3.
Connect the blue color connector to both your DVD player and YPbPr’s blue connector
port on the back of your UHD TV.
4.
Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your UHD TV.
5.
Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and YPbPr’s white connector port on the back of your UHD TV.
6.
Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your UHD TV.
7.
Turn on the UHD TV and your DVD player.
8.
Use the remote control’s source button or the source button on the TV to switch to
YPbPr.
Please Note:
Sometimes DVD players will not automatically output to YPbPr. You will
need to configure your DVD player with AV connection first then switch to
YPbPr. Please reference the DVD player’s manual, to make sure the DVD
player is configured to output correctly to the TV.
This source shares audio jacks with composite video.