Sceptre E420BV-F120 - Manual (Page 12)

- 12 -
www.SCEPTRE.com
SCEPTRE E420BV-F120 HDTV User Manual
Rear View Connections
1. HDMI1-2 – HDMI connects to devices that use HDMI cable, such as Blu-ray
or HD DVD player, or HD cable / satellite set-top box. This connection port
receives pure digital audio and high definition signal through one single cable.
This port also can accept a HDCP video device for video.
2. Audio In - This connection port is for people who want to provide audio to the
TV when using a PC or a DVI video device. The sources use 3.5mm mini-jack
audio cable.
3. VGA - This connection port connects to a PC for video using VGA cable. Be
sure to connect your audio cable to the VGA Stereo input if you want sound
out of VGA video source.
4. Video – Video connects to devices that use composite video cables such as
VCR or DVD player or Wii™. Connect the yellow for video and the red / white
for audio.
5. TV – This connection is for digital or analog cable without the cable box or
over-the-airwave antennas. The tuner is a hybrid tuner that tunes to both
analog and digital channels. This connection uses coaxial RF cable. For
over-the airwave digital stations please check
http://www.antennaweb.org .
6. YPbPr – This connection port is for DVD players or satellite / cable set-top
boxes that use component cables. From left to right, connect green, blue,
and red for video, and then connect white for left channel audio, and red for