Sceptre E195BD-SHDC - Manual (Page 8)

- 8 -
www.SCEPTRE.com
SCEPTRE E195 Series LED HDTV User Manual
Attaching or Removing the Stand
1. To remove the stand completely, look at the back of the TV near the neck and
unscrew the 2 screws shown in the picture and the neck along with the base
should come off.
2. To attach the base place the display unit flat on a table. Afterwards attach the
base to the neck in a 45 angle and turn the base counter-clockwise to secure it to
the neck. Finally, screw in the 3 screws to secure the base to the neck.
3. To finalize your installation of the TV, please read the following
A.
If you are placing the TV on a stand, we would recommend you to use a TV
safety strap (not included) in order to minimize the possibility of the TV
toppling over.
B. If you are mounting the TV on the wall

Make sure the wall is structurally safe for the weight of the TV

Make sure the wall mount kit is compatible with the TV

Read and follow all instructions provided by the wall mounting kit.

Securely install all screws and connections