Attaching or removing the stand – Sceptre E195BV-HD User Manual
Page 8
- 8 -
www.SCEPTRE.com
SCEPTRE E195 HDTV User Manual
Attaching or Removing the Stand
1.
To attach the base, align the base and the TV.
Place the base on the TV’s neck
shown below.
2.
Rotate the base until you feel the base is locked, insert and tighten the two screws
in the circled area. The TV is ready for use.
3.
To remove the stand remove the three screws in the circled area and the neck will
come off.
See also other documents in the category Sceptre Televisions:
- E240PC-FHD (53 pages)
- X23WV-KOMODO (111 pages)
- X320BV-HD (51 pages)
- X320BV-HD (55 pages)
- X32BV-NAGA (93 pages)
- X32BV-FULLHD (47 pages)
- X325BV-FHDU (52 pages)
- X370BV-FHD (47 pages)
- X402BV-FHD (56 pages)
- X405BV-FHD3 (51 pages)
- X405BV-FMDU (56 pages)
- X408BV-FHDU (52 pages)
- H409BV-FHD (51 pages)
- X420BV-F120 (52 pages)
- X420BV-FHD (54 pages)
- X425BV-FHD3 (55 pages)
- X460BV-F120 (52 pages)
- X505BV-FHD (53 pages)
- X508BV-FHD (54 pages)
- X505BV-FHDU (54 pages)
- E555BV-FMQR (57 pages)
- X23PV-KOMODO (79 pages)
- X322BV-HD (55 pages)
- X320BV-ECO (49 pages)
- X325BV-FHD (54 pages)
- X328BV-FHD (53 pages)
- X372BV-FHD (55 pages)
- X400BV-FHD (47 pages)
- X405BV-FHD (54 pages)
- X420PV-F120 (52 pages)
- X425BV-FHD (52 pages)
- X460BV-FHD (53 pages)
- X20WG-1080P (38 pages)
- X20WG-NAGA2 (38 pages)
- X22WG-GAMER (42 pages)
- X20WG-Naga (24 pages)
- X22WG-1080P (44 pages)
- X22HG-Naga (44 pages)
- E165BV-HD (58 pages)
- E195BD-SHD+ (58 pages)
- E195BD-SHD+ (45 pages)
- E195BD-SHD+ (56 pages)
- E230BD-FHD (61 pages)
- E245BD-FHDU (57 pages)
- E246BD-FHD (61 pages)