Sceptre E195BD-SHD+ - Manual (Page 17)

- 17 -
www.SCEPTRE.com
SCEPTRE E195BD-SHD HDTV User Manual
Connecting Blu-ray DVD Player with Component YPbPr…
1. Make sure the power of HDTV and your Blu-ray DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your Blu-ray
DVD player and YPbPr’s green connector port on the back of your HDTV.
3. Connect the blue color connector to both your Blu-ray DVD player and YPbPr’s blue
connector port on the back of your HDTV.
4. Connect the red color connector to both your Blu-ray DVD player and YPbPr’s red
connector port on the back of your HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your Blu-ray DVD
player and YPbPr’s white connector port on the back of your HDTV.
6. Connect the red color connector to both your Blu-ray DVD player and YPbPr’s red
connector port on the back of your HDTV.
7. Turn on the HDTV and your Blu-ray DVD player.
8. Use the remote control’s source button or the source button on the TV to switch to
YPbPr.
Please Note:
• Sometimes Blu-ray DVD players will not automatically output to YPbPr. You
will need to configure your Blu-ray DVD player with AV connection first then
switch to YPbPr. Please reference the Blu-ray DVD player’s manual, to
make sure the Blu-ray DVD player is configured to output correctly to the TV.
•
If you use this connection, you will not be able to use the yellow
colored VIDEO connection with audio because the red and white audio
connections are shared.