Sceptre X22WG-GAMER - Manual (Page 21)

SCEPTRE X22 Page21
I/O Connector Definitions
AC Power
This connection is for providing power to the monitor. This connection uses a standard
computer power cord.
HDMI (High Definition Capable)
This connection port receives audio and high definition signal through one single cable.
It also doubles as HDCP source and DVI source with the provided HDMI to DVI
conversion cable. You can connect an up conversion DVD player, computer (via DVI
source), or set-top box through this cable. If you are using DVI or HDCP you will need
to connect an audio connection to the “Line In” connection port to provide audio. This
connection uses a HDMI cable or a HDMI to DVI cable.
DVI (High Definition Capable)
This connection port is used for PCs only for digital display.
VGA (High Definition Capable)
This connection port is by PCs only for analog display.
◎ ◎ ◎ ◎TO PC
1. USB-IN (By Model)
This connection is for linking to the PC’s USB port so that the two ( TO DEVICE ◎ ◎ ◎ ◎ )
USB 2.0 USB out ports on the monitor can function.
Note: due to the specification and limitation of USB 2.0, recommend not to use the cable
over 6ft when linking the monitor to PC. (USB A-B cable not included.)
2. MIC
This connection is for linking to the PC’s microphone port so that the ( TO DEVICE ◎ ◎ ◎ ◎ )
Microphone port on the monitor can function. DO NOT connect a microphone to this
port. (3.5mm Jack cable not included.)