Sceptre X20WG-1080P - Manual (Page 21)

SCEPTRE X20 Page21
On Screen Display (OSD) Menu
The OSD menu of the monitor provides various adjustments for the
monitor such as color, brightness, contrast, screen settings…..etc.
When you press the MENU button on the side of the monitor, the
OSD screen will appear. Select each of the functions with the (+) or (–)
buttons. Use the MENU button to enter each of the function or when
you’re in the function already, use the MENU button to select the
option you want to adjust. Use the (+) or (–) buttons to adjust each
option’s values.
AUTO ADJUST
This function auto adjusts the clock and phase of the monitor when
using VGA cable so the monitor will sync better with the video card
and produce a clearer picture.
1. You can use this function by pressing MENU, then press (+)
or (–) to select Auto Adjust.
2. Once Auto Adjust is highlighted, press MENU again to use
the function.
Please Note :
• This function is only available under VGA.