Sceptre X320BV-ECO - Manual (Page 16)

- 16 -
www.SCEPTRE.com
SCEPTRE X320 HDTV User Manual
Conn Conn Conn Connecting DVD Player with Component YPbPr… ecting DVD Player with Component YPbPr… ecting DVD Player with Component YPbPr… ecting DVD Player with Component YPbPr…
1. Make sure the power of X320 LCD HDTV and your DVD player is turned off.
2. Obtain a Component Cable. Connect the green color connector to both your DVD player
and YPbPr’s green connector port on the back of your X320 LCD HDTV.
3. Connect the blue color connector to both your DVD player and YPbPr’s blue connector
port on the back of your X320 LCD HDTV.
4. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your X320 LCD HDTV.
5. Obtain a RCA Audio Cable. Connect the white color connector to both your DVD player
and YPbPr’s white connector port on the back of your X320 LCD HDTV.
6. Connect the red color connector to both your DVD player and YPbPr’s red connector
port on the back of your X320 LCD HDTV.
7. Turn on the X320 LCD HDTV and your DVD player.
8. Use the remote control’s source button or the source button on the TV to switch to
YPbPr 1.
Please Note :
• Sometimes DVD players will not automatically output to YPbPr. You will
need to configure your DVD player with AV connection first then switch to
YPbPr. Please reference the DVD player’s manual, to make sure the DVD
player is configured to output correctly to the TV.