Santec PB-3800 - Manual (Page 2)

PRESSURE BALANCED SHOWER VALVE (PB-3800)
INSTALLATION AND ROUGH-IN
3.25”
4.00”
Top Down Screw Installation Set Screw Installation
H C H C
6.75"
9.80"
Designer Trim Plate Estate Trim Plate
6
.7
5
"
ILLUSTRATION B
All Thread
Stem
Lock Nut
Lock Plate
Trim Plate
Handle Base or Bell Handle
TRIM INSTALLATION
- Place the shower plate on the all thread
- Screw the Handle Flange (when applicable) into the All Thread
and tighten it firmly against the Trim Plate. Cylinder handles
require adapter between the flange and the All Thread.
- Screw the handle base (or bell) onto the All Thread and mark
the position. Cut off the excess thread.
- Insert the Handle into the Stem. Measure the excess between
the handle base or bell and the handle. Take off the handle
and cut the excess stem.
- Reinsert the handle into the stem and secure it using the set
screw or screw provided. Tighten the handle firmly.
PAGE 02
H H
C C
COLD
WARM
WARMER
HOT