Santec SA2WAY12 - Manual (Page 2)

In
1/2”-NPT
Out Out
Out to Hand Shower
O
u
t
to
S
h
o
w
e
r
H
e
a
d
Fr
o
m
C
o
n
tr
o
l U
n
it
Shower Head
1. Using 1/2" IPS, plumb the Diverter valve
accordingly to the handle styles described below.
(Measurement is from the center of water connection
to outside of finished wall).
2. Allow 1 3/4" diameter hole for the valve stems.
3. Allow a 1 1/4" diameter hole for the shower arm
or personal shower elbow.
WARNING: Where tile construction is planned for the
finished walls, allow for extra thickness
dimensions when roughing the valve.
TEST FOR PROPER FUNCTION BEFORE CLOSING WALLS!
5. Apply the finish trim.
Supply
Elbow
Required
PAGE 02
INSTALLATION
Failure to follow these instructions may cause damage or improper operations and nullify the warranty.
ROUGH IN
.
NOTE:
6.5”
center of inlet
finished wall
Off
SANTEC
On
1.75
SA2WAY12
MODEL NUMBER