Santec 9565KT - Manual (Page 4)

0 4
P A P E R H O L D E R
Using the Allen key provided, loosen the Ring
Paper Post’s Set Screw.
Slip the Ring Paper Post with the Post Flange
Washer onto the Mounting Hardware Post.
Secure the Ring Paper Post by tightening the Set
Screw.
Mark the four screw hole positions by using the Mounting Hardware
Post.
Using a drill, pre-drill the holes.
Insert Anchors into the wall.
Secure the Mounting Hardware Posts by screwing the Screws into the
Anchors.
Installing On Solid/Hard Surface
Securing In Position
9565KL, KR, KT _ _