Santec 9950CU - Manual (Page 3)

INSTALLATION INSTRUCTIONS
PAGE 03
ROMAN TUBS
COLLECTION
H
ANDLE
T
RIM
I
NSTALLATION
MAXIMUM DECK THICKNESS 1”. DEPENDING ON DECK THICKNESS, IT MAY BE
NECESSARY TO COUNTERSINK FROM BELOW.
Step 1
1. Unscrew pre -assembled handle trim
from the valve body. Hot valv e
assembly “Red” to be mounted on left.
Cold valve assembly “Blue” to be
mounted on right.
Step 3
1. Slip valve body up from below tub dec k.
2. Place the top lock nut and the fiber
gasket back onto the valve body unti l
the top surface of the lock nut is flush
with the top surface of the valve bo dy.
3. Secure the top lock nut in place before
inserting the handle.
Step 2
1. Remove the top lock nut and the
fiber gasket from the valve body.
2. Apply a ring of silicone caulking
around the handle hole on deck top.
DO NOT USE PLUMBERS’ PUTTY,
WHICH CAN DAMA GE FINISH.
Step 4
1. Align handles with respect to the
spout and tighten bottom lock nut
until secure.
Tub deck
Fiber gasket
Lock nuts