Santec 2850MO - Manual (Page 4)

PAGE 04
INSTALLATION INSTRUCTIONS
HOT WATER
SUPPLY
COLD WATER
SUPPLY
Cold Valve
Hot Valve
WATER TEST
- Turn on the cold water supply.
- Use the handle from the faucet set to turn the valve on and off.
- Check for leaks. If water leaks from any of the connections merely tighten the
connections until the leak stops.
- Repeat the same procedure for the hot water supply.
SANTEC RECOMMENDS:
- The use of teflon tape or equivalent on all threaded joints.
- The installation of hard plumbing, not flex connections for all connections.
- An access panel provided for all roman tub installations.
ROMAN TUBS
COLLECTION