Sandia Aerospace SAFE 328 - Manual (Page 5)

1.2.2 Operational Characteristics
Operating Voltage 22-31Vdc
Current Operating .400 Amps Nominal
Start-up .550 Amps
Air Flow (All Ports) 20 CFM No Static Pressure (10CFM @ .08 H2O Static Pressure)
Operating Temp -20 to +55 o C
Max Operating Altitude 55,000 Feet
1.2.3 Certification
FAA-PMA PQ0894SW Diamond DA40
DO 160D [F1]BAA[S2R2U(F,B2,M)]XXXXXXZBAZA[XX]M[XXXX][XX]XX
2.0 Installation Procedures
2.1 General
The SAFE 328 is supplied with a mounting connector and four contacts. Only three contacts are re-
quired and the spare one is provided in case one is destroyed during installation. The SAFE 328 is
mounted with three (3) number 6 or 8 screws. Cooling air is ducted to the device to be cooled using
aircraft approved tubing. Unused ports should be capped.
2.2 Equipment Required
2.2.1 Supplied
SAFE 328 System Includes:
SAFE 328 Fan 305467-00
Installation Kit 305477-00
Mating Connector 305479-03
Mating Pins 305478
2.2.1 Required but not supplied
Three (3) Number 6-32, 8-32 or equivalent mounting screws
2.3 Mounting
The SAFE 328 mounts with three (3) number 6-32 or 8-32 or equivalent machine screws.
4
305467-00-IS
Description Manufacturer Series Number Manf. Part Number Sandia Part Number
Connector Housing Molex 2695 22-1-3037 305479-03
Crimp Contact Molex 2759 08-50-0114 305478
Hand Crimper Tool Molex NA *11-01-0185 or CR2262C NA
Extraction Tool Molex NA *11-03-0022 NA
Insertiion Tool Molex NA *63812-0000 NA
Figure 2-1
Connector item Part Numbers