Clarion DB566USB - Manual (Page 19)

21
English
DB566USB
2-1. Select “SCRN SVR”.
3-1. Turn the [ROTARY] knob to select the setting.
Each time you turn the [ ROTARY] knob,
the setting changes in the following order:
SS OFF SS ON.
To change display setting
1. Press the [A] button to switch to the adjustment
selection display.
2. Press the [ , ] button to select the “item
name”.
“ CLOCK(E)” “SCRN SVR”
“A-SCROLL”
3. Turn the [ ROTARY] knob to select the “desired
setting value”.
∗ In the case of item names appearing with the
“E” suffix, after the item name, the [ ] button
must be pressed to display the setting value.
∗ After completing settings, press the [A] button
to return to the previous mode.
Turning the screen saver function
on or off
This unit is provided with the screen saver function
which allows you to show various kinds of patterns
and characters in the operation status indication
area of the display in a random order. You can turn
on and off this function.
If the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
∗ The factory default setting is “ON”.
Setting the method for title scroll
Set how to scroll in MP3/WMA title.
∗ The factory default setting is “ON”.
2-1. Select “A-SCROLL”.
3-1. Turn the [ROTARY] knob to select “ON” or
“OFF”.
Setting the clock
2-1. Select “CLOCK (E)”.
3-1. Press the [ ] button.
3-2. Press the [ , ] lever upward or down-
ward to select the hour or the minute.
3-3. Turn the [ ROTARY] knob to set the correct
time.
∗ The clock is displayed in 12-hour format.
3-4. Press the [ ] button to store the time into
memory.
Note:
You cannot set the clock when it is displayed with
only the ignition on. If you drain or remove the carʼs
battery or take out this unit, the clock is reset. While
setting the clock, if another button or operation is
selected, the clock set mode is canceled.
ON:
To scroll automatically.
OFF:
To scroll just 1 time when the title was changed
or the [T] button was pressed for 1 second or
longer.
Operations Common to Each Mode