Reliable T1 - Manual (Page 8)

06
INSTRUCTIONS FOR USE OF CARPET GLIDER ACCESSORy
• Please ensure micro fiber cloth is attached as outlined previously.
• Please place carpet glider on the floor in an upright position with the
triangular flat surface facing downwards.
• Please place Floor Steamer head on the glider as illustrated
• The Carpet Glider is now ready for use.
IMPORTANT
The Carpet Glider is designed not to be fixed to the floor head for safety
reasons including preventing burns.
The carpet glider is designed for use on soft carpeted areas only. It is not
designed for use on hard floor surfaces.
CLEANING AND MAINTENANCE
CAUTION: Prior to cleaning or maintenance isolate the unit by removing the
cord from the power socket. Do not immerse the unit in water.
The micro fibre cloth can be machine washed in hot water and air dried.
Wipe the steamer with a soft cloth.
The Steamer should only be used with its own specially developed floor cloths
and Filter (spare Cloth Pads and Filters are available from your retailer)
SPARE PARTS
2 X Large O Ring – Can be used to replace O rings at bottom of water tank.
1 X Small O Ring – Can be used to replace O ring at bottom of filter.