Ram Trucks 2014 3500 - CNG Supplement - Manual (Page 43)

enter that feature. Once PTO Mode or Parameters is
selected, use the UP/DOWN buttons to scroll through
the sub-menus.
PTO Mode Sub-Menus:
• Standard
• Remote
• Mobile
Parameters Sub-Menus:
• Single Set RPM
• Remote RPMs
• Auto Resume
• Max Speed
To make your selection, scroll up or down until the
preferred setting is highlighted, then press and release
the SELECT button until a check-mark appears next to
the setting, showing that the setting has been selected.
AUX Switch Settings
When this feature is selected, the Auxiliary Switch set-
tings can be adjusted. Once AUX Switches is selected, use
the UP/DOWN buttons to scroll through the sub-menus.
AUX Switch Sub-Menus:
• Type
• Latching (stays active after the button is pressed)
• Momentary (is only active when the button is held
down)
• Power Source
• Battery
• Ignition
• Last State
• On
• Off
3
UNDERSTANDING YOUR INSTRUMENT PANEL 41