Ram Trucks 2013 3500 - CNG Supplement - Manual (Page 46)

Power Take-Off Settings
When this feature is selected, the PTO mode and Param-
eters can be adjusted. The To make your selection, scroll
up or down until PTO Mode or Parameters is high-
lighted, then press and release the SELECT button to
enter that feature. Once PTO Mode or Parameters is
selected, use the UP/DOWN buttons to scroll through
the sub-menus.
PTO Mode Sub-Menus:
• Standard
• Remote
• Mobile
Parameters Sub-Menus:
• Single Set RPM
• Remote RPMs
• Auto Resume
• Max Speed
To make your selection, scroll up or down until the
preferred setting is highlighted, then press and release
the SELECT button until a check-mark appears next to
the setting, showing that the setting has been selected.
AUX Switch Settings
When this feature is selected, the Auxiliary Switch set-
tings can be adjusted. Once AUX Switches is selected, use
the UP/DOWN buttons to scroll through the sub-menus.
AUX Switch Sub-Menus:
• Type
• Latching (stays active after the button is pressed)
• Momentary (is only active when the button is held
down)
44 UNDERSTANDING YOUR INSTRUMENT PANEL