Ram Trucks 2013 3500 - Owner Manual - Manual (Page 192)

or the
ЉPARKSENSE UNAVAILABLE SERVICE RE-
QUIRED Љ message for as long as the vehicle is in RE-
VERSE. Under this condition, ParkSense® will not oper-
ate.
If ЉPARKSENSE UNAVAILABLE WIPE REAR SENSORSЉ
appears in the Electronic Vehicle Information Center
(EVIC) make sure the outer surface and the underside of
the rear fascia/bumper is clean and clear of snow, ice,
mud, dirt or other obstruction, and then cycle the igni-
tion. If the message continues to appear, see an autho-
rized dealer.
If ЉPARKSENSE UNAVAILABLE SERVICE REQUIREDЉ
appears in the EVIC, see your authorized dealer.
Cleaning The ParkSense® System
Clean the ParkSense® sensors with water, car wash soap
and a soft cloth. Do not use rough or hard cloths. Do not
scratch or poke the sensors. Otherwise, you could dam-
age the sensors.
ParkSense® System Usage Precautions
NOTE:
• Ensure that the rear bumper is free of snow, ice, mud,
dirt and debris to keep the ParkSense® system oper-
ating properly.
• Jackhammers, large trucks, and other vibrations could
affect the performance of ParkSense®.
• When you turn ParkSense® off, the instrument cluster
will display ЉPARKSENSE OFFЉ. Furthermore, once
you turn ParkSense® off, it remains off until you turn
it on again, even if you cycle the ignition key.
• When you move the shift lever to the REVERSE
position and ParkSense® is turned off, the instrument
cluster will display
ЉPARKSENSE OFFЉ message for as
long as the vehicle is in REVERSE.
190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE