Dodge 2010 Dakota - Manual (Page 21)

SPEED CONTROL
Cruise ON/OFF
• Push the ON/OFF switch to activate the
Speed Control.
• CRUISE will appear in the instrument cluster
to indicate the Speed Control is on.
• Push the ON/OFF switch a second time to
turn the system off.
Set
• With the Speed Control on, push and
release the SET switch to set a desired
speed.
Accel/Decel
• Push and hold the RESUME/ACCEL switch to accelerate or push and hold the DECEL
switch to decelerate the vehicle; release the switch to save the new set speed.
• Once a speed is set, pushing the RESUME/ACCEL switch once or the DECEL switch
once will increase or decrease the set speed approximately 1 mph (2 km/h).
Resume
• To resume a previously selected set speed in memory, push the RESUME/ACCEL
switch and release.
Cancel
• Push the CANCEL switch, or apply the brakes or clutch, to cancel the set speed and
maintain the set speed memory.
• Push the ON/OFF switch to turn the system off and erase the set speed memory.
19
OPERATING YOUR VEHICLE