Quick Charge OBXU User Manual
Page 5
failure. Re-charge batteries as soon as possible after a deep
discharge, but not if they are warm, allow a cooling down period.
Provide adequate ventilation when charging batteries. Chargers can
ignite flammable materials and vapors. Do not use near fuels,
grain, dust, solvents, or other flammables.
Do not charge batteries in excessively hot temperatures; wait till
the cool of the evening.
PRE CHARGE INFORMATION:
Mount the charger in the desired location, any orientation. Allow
space for the charger to dissipate heat, it will get hot while in use.
Do not seal the charger in an air tight compartment. Do not cover
the charger with any material. NOTE: The OB models are NOT
water proof, they are water resistant. This means they cannot
withstand immersion, or continuous exposure from pressure
washers, or heavy rain.
DRIVE LOCKOUT OPTION:
If your charger has an extra pair of small wires with a connector,
spade terminals, or just bare wires, it has this option. These wires
connect to your equipment if it has this feature. The purpose is to
disable the drive mechanism of the equipment when the charger is
plugged in so it cannot be moved and cause damage to the AC cord
and receptacle. These wires do not have to be connected for the
charger to work.
REMOTE LED OPTION:
If your charger has this option, install as shown: