PRG S400 Tools User Manual 3.1 - Manual (Page 10)

8 PRG SERIES 400 ® TOOLS UTILITY USER MANUAL
Device Configuration
This section displays the current configuration status for a device, and allows editing of the name, inputs, and
outputs.
Button functions are as follows:
+ Update - sends changes to the device.
+ Revert - returns the device to its original settings.
+ Default - resets the device to its factory default settings.
+ Info - brings up the Device Information window.
Devices In Configuration
This section displays the number of devices stored in the
configuration file. By storing a configuration file, it is possible
to create a configuration before having an actual physical
system. The configuration can then be assigned to real
devices once a physical system is hooked up.
Button functions are as follows:
Click the Add (+) button to create a "virtual" module and then set its inputs and outputs.
Click Delete (-) button to delete a virtual module.
Configurations may be saved to external files using the Save Configuration button and imported using the Load
Configuration button.
Pressing the Assign Configuration button will open the Merge Configuration window. In this window, the Live devices
are shown on the left, while the Saved devices are shown on the right. Select one from each list and click the Assign
button to map the Saved configuration to the Live configuration.
Saves current
configuration to
Opens Merge
Configuration window
Loads configuration
from an external file.
Live Devices Saved Devices
an external file.
Maps Saved config to Live config