PiPO M9 User Manual

Page 33

３３

Select the USB driver in accordant with your PC system, the driver is

included in the “RK batch tool”. Then the PC will install the USB driver

automatically. After finishing USB installing, go back to upgrading

mode.

Note

If your PC is with Win7 or Vista system, it will not pop out the guide

leading you to install the driver, you get to install the driver in “My

Computer”.

1. Right click “My Computer”, select “Device Manager”

2. There will be an “Unknown Device” with an exclamation mark

appears

3. Right click the “Unknown Device”, select “renew driver software”

4. Load the USB driver included in the “RK batch tool” to install the

USB driver.

Note:

Note: Do not turn on “USB Debugging” in the setting when upgrading

firmware.

5. When you finish the driver installation, you can come back to

upgrading procedures.