phil&teds pepe v1 - Manual (Page 4)

nitty gritty
a
pe pe and you
You and pe pe are going to be getting
close. So let's make sure you get nice
and comfy with each other.
1.
Unbuckle the hip belt and back
adjuster 'a' .
2. Loosen the shoulder and side straps 'b' .
3.
Put pe pe on, with the shoulder straps
on your shoulders. pe pe is worn on your
front, not your back.
4.
Do up the hip belt behind you.
The top of the belt should be resting
on your hips. Tighten it by pulling the
webbing straps until firm.
Use the strap holders.
5.
Do up the back adjuster 'c' behind you,
by pulling the webbing straps until firm.
6.
Do up the side straps. Tighten by pulling
the webbing straps until they're firm but
not so tight that they pull the hip belt up.
7.
Check the overall feel of the fit.
How are you two getting on?
Adjust for added comfort.
IMPORTANT - ASK THE STORE IF YOU ARE UNSURE
ABOUT ANY ASPECT OF THE ADJUSTMENT
a
b
c