phil&teds metro v1 - Manual (Page 4)

nitty gritty
a
a
b
c
child's space!
1.
Loosen the seat side adjustment straps 'a' .
2.
Undo the safety harness buckle and
loosen the straps 'b' .
3.
Stand on the foot strap 'c' to stabilise
the carrier.
4.
Put your child’s arms through the
shoulder harness.
5.
Clip and adjust the buckle for a firm fit.
6.
Tighten the side straps 'a' to secure your
child. The straps should be firm but not tight.
your space!
Now lets fit the me tro to you. (Essential for your
body & soul!) The initial adjustment should be
done without your child in the me tro.
1.
Loosen the shoulder '1' and hip straps '2' .
2.
Put the carrier on.
3.
Tighten the shoulder straps.
4.
Do up the hip belt
(the belt should sit on your hips)
5.
Tighten until firm.
6.
Tighten the shoulder straps until firm by
pulling down on the webbing straps '1' .
7.
Clip up the chest strap '3' .
8.
Slide it up or down the harness
straps for the best fit.
9.
Tighten the yoke straps '5' for best fit.
(Tighter shoulder and yoke straps will
help locate the load higher on your back
- you’ll find that more comfortable!)
10.
To adjust the harness height: undo the
hook and loop strap '4' and rethread
through the webbing tabs at the
desired height.
Never leave your child alone in the me tro.
Clever it is, but a nanny it's not!
b