phil&teds escape v2 2009 - Manual (Page 4)

carry
escape instructions
KEEP INSTRUCTIONS FOR FUTURE USE.
Be hands free & ready to ‘escape to the
back of beyond’, in no time! Here’s how:
bits ` bobs
The red numbers below refer to escape parts
indicated on the inside back cover of this guide.
For adult:
1.
Top stabiliser straps
2. Chest strap
3. Shoulder straps
4. Center zip
5. Hipbelt
6. Lower stabiliser straps
7. Fold-out base
8. Main carrier pocket
9. Water bladder pocket
10. Zip-off day pack
For child:
11. Seat height adjuster
12. Carrier side straps
13. Hood
14. Visor
15. Black rods
16. Red fabric slots
17. Hood attchment strap
18. Elastic loop
19. ‘Kiddie-up’ foot stirrups
20. Change mat (in main carrier pocket)
safe ` sound
We’ve attained the following safety standards:
• ASTM F2549-06
• EN 13209-1:2004
The red letters below refer the helpful drawings
on the inside front cover of this guide.
step 1: ‘stand’ proud!
The escape features a self standing fold-out
base, so you can ‘take a load off’! Make light
work of setting up the escape, & fold this
out now:
a From its folded-away position, grasp the
base arm & pull it out toward the back of
the carrier. The base will self lock.
Note Place the escape on a flat surface &
confirm it sits upright, indicating correct
extension of the fold-out base.
b To pack down after a hard day’s adventuring:
grasp the base arm & pull it down then fold
it in toward the back of the carrier.
step 2: put your back into it!
Note Your initial carrier adjustment should be
done without a child in the carrier.
c Load carrier with 10 -15kg/22 - 33lbs of
dummy weight. ie; 50 cans of baby food,
(puréed brussel sprouts and broccoli is best!)
2