phil&teds metro v2 2009 - Manual (Page 4)

metro
metro
TM
instructions
KEEP INSTRUCTIONS
FOR FUTURE USE.
Be hands free & ready to ‘lighten the urban
trip fantastic’, in no time! Here’s how:
bits & bobs
The red numbers below refer to metro parts
indicated on the inside back cover of this guide.
For adult:
1.
Top stabiliser straps
2. Chest strap
3. Shoulder straps
4. Center zip
5. Hipbelt
6. Lower stabiliser straps
7. Fold-out base
8. Carrier pocket
For child:
9. Seat height adjuster
10. Carrier side straps
11. Hood*
12. Visor*
13. Black rods*
14. Red fabric slots
15. Hood attachment strap
16. Elastic loop
17. Chest harness
safe & sound
We’ve attained the following safety standards:
• ASTM F2549-06
• EN 13209-1:2004
The red letters below refer to the helpful draw-
ings on the inside front cover of this guide.
step 1: ‘stand’ proud!
The metro features a self standing fold-out
base, so you can ‘take a load off’! Make light
work of setting up the metro, & fold this
out now:
a From its folded-away position, grasp the
base arm & pull it out toward the back of
the carrier. The base will self lock.
Note Place the metro on a flat surface &
confirm it sits upright, indicating correct
extension of the fold-out base.
b To pack down after a hard day’s adventuring:
grasp the base arm & pull it down then fold
it in toward the back of the carrier.
step 2: put your back into it!
Note Your initial carrier adjustment should be
done without a child in the carrier.
Load carrier with 10–15kg/22–33lbs of
dummy weight. ie; 50 cans of baby food,
(puréed brussel sprouts and broccoli is best!)
2
* kit sold separately