Cary Audio Design CAD 808 User Manual
Page 5
DIMENSIONS:
10”W x 18”D x 6”H (25.4 cm x 45.7 cm x 15.2 cm)
WEIGHT:
45 Lb.. (20.4 kg)
CIRCUIT TYPE:
Push-Pull Triode Class A, Ultra-linear Class A/B
POWER OUTPUT:
30 Watts Triode, 60 Watts Ultra-linear
INPUT SENSITIVITY: 1.2 volt for full output
INPUT IMPEDANCE: 150,000 ohms
NOISE AND HUM:
-87 dB below rated output
FREQUENCY RESPONSE: 10 Hz to 82,000 Hz + 0, -3.0 dB @ 1 watt
TUBES:
2-12BZ7 Dual Triode, Phase inverter, gain stage (12AX7, 12AY7)
2-EL-84 Current source (or 6BQ5)
4-KT-88 Output tubes (or EL-34, 6550, KT-66, KT-77, KT-90)
2-1629 Green ‘Cat Eye’ indicator tubes
TRANSFORMERS:
1-EI laminated core power transformer
2-Special interleaved output transformer
3-Filter Chokes
200% duty cycle on all transformers
RESISTORS:
1.0 % metal film
CAPACITORS: Polystyrene and polypropylene (oil filled optional)
POWER SUPPLY
CAPACITORS:
2-560 mFD @ 450 VDC
3-10 mFD Film and foil @ 600 VDC
1-47 mFD @ 450 VDC
AC CORD:
Detachable 3 conductor 14 gauge
AC POWER
REQUIREMENTS:
117 volts or 240 volts AC 50/60 Hz
300 watts operate
WARM-UP TIME:
3 minutes
BREAK-IN PERIOD:
100 hours of music playing time
FINISH:
Black Epoxy powder coat, Anodized Aluminum face plate
Specifications are subject to change or improvement without notice or obligation.