Philips HP6576-50 - Manual (Page 10)

Cleaning
IMPORTANT
► Always switch the Epilator OFF and remove
plug from electrical outlet and epilator before
cleaning.
► Never immerse this appliance in water.
I Do not use scouring pads, abrasive cleaners or
aggressive liquids such as gasoline or acetone
to clean the Epilator.
Cleaning the Epilator Head and
attachments
► It is essential for hygienic reasons and
optimum performance that the epilating head,
attachments and rotating discs are cleaned
after each use.
I Never clean, remove, or replace epilating head
or attachments while motor is ON.The
rotating discs are not removable from the
epilating head.
k Do not apply pressure or touch rotating discs
with hard objects as this may dent or damage
the discs. If damage occurs, discontinue use
immediately.
D
Remove the epilating head by pressing the
release knob (1) and remove epilating head
from the appliance (2) (Fig. 9).
B Remove loose hairs from the epilating discs
and attachments with the brush (Fig. 16).
Never try to detach the epilating discs from the
appliance.
B
Rinse the attachments thoroughly under
warm tap water.
Q Rinse the epilating head thoroughly under
warm tap water while turning the discs with
your thumb (Fig. 17).
H Shake off excess water (Fig. 18) and dry
epilating head and attachments completely
with a soft towel.
Do not replace the epilator head and attachments
onto the appliance until it is completely dry.
Q Place the epilating head back onto the
appliance and press until it snaps into place.
You will hear a click (Fig. 19).
The epilating head only fits onto the appliance in
one direction.
Cleaning the shave, trim and style
attachment and the trimming comb
► Do not apply pressure to shaving head. Do not
touch foil with hard objects as this may dent
or damage foil or cutters. If damage occurs,
replace damaged parts.
n Remove the trimming comb, if attached,
by pulling it off the shave, trim and style
attachment (Fig. 20).
B
Press the release knob (1) and remove
the shave, trim and style attachment from
the appliance (2) (Fig. 21).
B
Remove the shaving unit from the shave,
trim and style attachment (Fig. 22).
□ Rinse the shaving unit, the shave, trim and
style attachment and the trimming comb
under a lukewarm tap water while turning
them (Fig. 23).
H Shake off excess water from the shaving unit,
the shave, trim and style attachment and the
trimming comb (Fig. 24) and dry completely
with a soft towel.
B Reattach the shaving unit to the shave, trim
and style attachment. Place the shave, trim
and style attachment on the appliance and
press until it snaps into place.You will hear
a click.
B Put the trimming comb on the shave, trim
and style attachment.
This Epilator has no other user-serviceable parts.
For assistance, call 1-800-243-7884.