Philips QT4070-32 - Manual (Page 6)

Multifunctional Display
I The display is activated when you press the
ON/OFF button and when you turn the zoom
lock.
During trimming, the display provides the following
information (fig. 5):
> The symbol appears when no comb is
attached to the Trimmer
k Remaining hair length after trimming in
millimeters
k Remaining charge level
k Travel lock indicator
k The symboll ‘E’ if the cutting unit is blocked
Trimming
k Use this Trimmer for its intended household
use as described in this manual,
k Always comb your beard and/or moustache
with a fine comb before you start trimming,
k If you are trimming for the first time, be
careful. Do not move the Trimmer too fast.
Make smooth and gentle movements,
k After trimming, residual hair length can vary
depending on hair type.
Trimming With Trimming Comb
k The hair length settings are indicated in
millimeters on the display. The settings
correspond to the remaining hair length after
trimming.
k The trimming combs cut hair to a length of
1/32-23/32 in (1-18 mm),
k For contouring and trimming longer beards,
use the contour-following trimming comb,
k A trimming comb must be on Trimmer
in order to use the Zoom Lock.
H
Slide the trimming comb onto the Trimmer
(fig-6).
u
Turn the Zoom Lock (fig. 7) to the desired
hair trimming length setting (see table).The
display shows the selected hair length.
k If you are trimming for the first time, start by
using the maximum trimming length setting
of 23/32 in. (18mm) to prevent accidentally
trimming hairs too short. As you become
familiar with the settings, adjust Zoom Lock
to desired trimming length.
D
Turn the Trimmer ON (fig. 4).
□ To trim in the most effective way, move the
Trimmer against the direction of hair growth.
Do not move the trimmer too fast. Make
smooth and gentle movements and make
sure the surface of the trimming comb always
stays in contact with the skin (fig. 8).
NOTE: Since all hairs do not grow in the same
direction, you may want to try different trimming
positions fi.e.. upwards, downwards, or acrossV
Practice is best for optimum results.
B You can use the turbo function for extra
suction power and trimming speed (see
section Turbo Power’).
□ Turn the Trimmer OFF.
Q Clean the Trimmer (see section ‘Cleaning’).
Trimming Length Settings Table
Hair Length (mm) Hair Length (in.)
1 Stubble Length 1/32
3 1/8
6 1/4
9 3/8
12 15/32
15 5/8
18 23/32