Clarion VRX765VD - Manual (Page 25)

Basic Operations
27
VRX765VD
280-8358-00
English
Owner
’s ma
nua
l
Warning display when CCD camera
is installed
When a TV tuner (optional) is installed together
with optional CCD camera, the following warning
message is displayed during use of the CCD
camera: “Make sure of safety around your
vehicle”.
Switching the VTR system between
NTSC and PAL
Note:
• This function is enabled only when the panel is
open.
• This setting is applied only to the VISUAL/VTR
input mode.
Changing the color of the title and
command bars in the screen
Turning on/off the motion of the
background picture
Front monitor lock
When an external device is connected to the
Visual terminal, lock the front monitor to show the
visual input source.
1. Keep pressing the [ADJ] button more than 1
second to set the monitor lock.
The front monitor screen is locked to show the
visual input source.
2. To cancel the monitor lock, press the [ADJ]
button.
The screen returns to show the image of the
selected mode.
Adjusting the GENERAL
1. Press the [ADJ] button, then touch the
[GENERAL] key.
2. Perform the adjustment for the desired item.
See the following sections for detail.
3. Touch the [Back] key to return to the previous
screen.
* In the following sections, only the details
regarding adjustments are described,
procedures to select items are skipped.
Clock Adjustment
Setting the BEEP
The sound heard when you make operations is
called “beep”. The unit can be set up so that it
does not produce this beep sound.
* The factory default setting is “BEEP ON”.
2-1. Touch the [ON] or [OFF] key of the
CAMERA WARNING item to turn this
function on or off (The factory default setting
is “ON”).
2-1. Touch the [NTSC] or [PAL] key of the
NTSC/PAL item to set the VTR system (The
factory default setting is “NTSC”).
2-1. Touch the [AUTO], [DAY] or [NIGHT] key of
the COLOR item to set the color mode (The
factory default setting is “AUTO”).
“AUTO” :
The color is changed according to the status
of the car light:
When the car light is off: light gray color
When the car light is on: dark gray color
“DAY” :
Set to the light gray color.
“NIGHT” :
Set to the dark gray color.
2-1. Touch the [ON] or [OFF] key of the MOTION
item to set the function (The factory default
setting is “ON”).
2-1. Touch the [ ]] key of the CLOCK item.
2-2. Touch the [ {] and [}] keys under the Hour,
Minute and a.m./p.m. box to adjust the time,
then touch the [SET] key (The factory
default setting is “1:00 a.m.”).
* The time is displayed in 12-hour format.
2-1. Touch the [ON] or [OFF] key of the BEEP
item to turn the function on or off.
Eng.book 27 ページ ２００５年１２月２７日 火曜日 午後１１時３６分