Contec CheckMate RT-U49+ - Manual (Page 14)

For a 2 For a 2 nd nd TV, TV,
VCR or DVD… VCR or DVD…
Programming Audio Programming Audio
1. Turn on 2 1. Turn on 2 nd nd TV TV
2. Press [DEVICE], then [MUTE] 2. Press [DEVICE], then [MUTE] together together until buttons light up until buttons light up
(approx. 2 - 3 sec.) (approx. 2 - 3 sec.)
3. Press [AUDIO], then [TV]. [AUDIO] & [TV] buttons will blink 3. Press [AUDIO], then [TV]. [AUDIO] & [TV] buttons will blink
4. a. Press & hold [CH ^] until 2 4. a. Press & hold [CH ^] until 2 nd nd TV turns off TV turns off
Or Or
b. Enter 3-digit setup codes until 2 b. Enter 3-digit setup codes until 2 nd nd TV turns off TV turns off
5. Press [MUTE]… 5. Press [MUTE]…
a. If 2 a. If 2 nd nd TV turns on, press [AUDIO] to lock in code. [AUDIO] TV turns on, press [AUDIO] to lock in code. [AUDIO]
button will blink and go out button will blink and go out
Or Or
b. If 2 b. If 2 nd nd TV doesn’t turn on, repeat steps 4 and 5 until 2 TV doesn’t turn on, repeat steps 4 and 5 until 2 nd nd TV TV
turns on and off. Can also press [CH v turns on and off. Can also press [CH v ] ] one one press at a time press at a time
until 2 until 2 nd nd TV turns on and off TV turns on and off