Talkswitch 24-CA - Manual (Page 183)

V O I P I N F O R M A T I O N 1 7 1
3. Ensure that you have at least one line hunt group configured (i.e. 88) to
Line Type: TalkSwitch VoIP Numbers.
4. Callers can now dial 88 from any extension to get a VoIP dial tone and
then enter 4004 to reach the VoIP location.
Figure 134: TalkSwitch profile in System Information
For VoIP calls made through a service provider, the service provider will
assign the VoIP numbers to be used for their service. To assist in assigning
VoIP numbers for your network, use the 5.6 VoIP network administration
form on page 180.
5.4.3.1 Assign VoIP phone numbers
TalkSwitch Profile section
All VoIP numbers are inactive when the system is first configured.
1. In the TalkSwitch System Configuration window, select
System Information -> VoIP Numbers.
2. Select VoIP 1 and check the Activate VoIP Number box, the default profile
for entering a phone number is the TalkSwitch Profile.
3. Phone numbers 250-299 have special functionality with TalkSwitch.
They can be dialed directly from any extension or auto attendant and
are routed automatically via VoIP to the destination with the number
assigned to one of its ports. Part of the role of an administrator is to