Cambridge Audio 80 Series - Manual (Page 25)

80 Series DVD player 25
There is no power
Ensure the AC power cord is connected securely.
Ensure the plug is fully inserted into the wall socket and is switched on.
Check fuse in the mains plug or adaptor.
The player will not read the disc
Check the disc is not loaded upside down.
Check that the disc is not too scratched or dirty.
There is no sound
Ensure that the amplifier is set correctly.
Check that the interconnects are inserted correctly.
The disc is skipping
Check that the disc is not too scratched or dirty.
Ensure the player is on a firm surface and not subject to vibrations.
There is a hum coming from the speaker
Ensure that all cable connections are secure.
The remote handset will not function
Check that the batteries have not expired.
Ensure that nothing is blocking the remote sensor.
TROUBLESHOOTING
85/86/89 DVD player
There is no image, but sound
You have set the DVD player to progressive scan mode. Simply press
the I-Scan button.
Press CD Mode button.
N Noottee:: Static electricity or other external influences may cause malfunctioning of
this unit. In this case, unplug the power cord and then plug back in. This will usually
reset the unit for proper operation.