Clarion DXZ525 - Manual (Page 13)

DXZ525
17
English
Hi / Lo dimmer control
You can adjust the reduced illumination level of
the dimmer.
∗
The factory default setting is “ON”.
1. Press and hold the [A-M] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [ a ] or [ d ] button to select “DIM-
MER”.
3. Turn the [ROTARY] knob clockwise to “ON”
or counterclockwise to “OFF”.
4. Press the [A-M] button to return to the previ-
ous mode.
AUX function
This system has an external input jack so you
can listen to sounds and music from external
devices connected to this unit.
Selecting AUX IN sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
∗
The factory default setting is “MID”.
1. Press and hold the [A-M] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [ a ] or [ d ] button and select
“AUX SENS”.
3. Turn the [ROTARY] knob clockwise or coun-
terclockwise as needed and select from
“HIGH”, “MID” or “LOW”.
4. Press the [A-M] button to return to the previ-
ous mode.
Setting the clock
1. Press and hold the [A-M] button for 1 second
or longer to switch to the adjustment selec-
tion display.
2. Press the [ a ] or [ d ] button to select
“CLOCK En”.
3. Press the [ s ] button.
4. Press the [ a ] or [ d ] button to select the
hour or the minute.
Operations Common to
Each Mode
CD Operations
Scan play
The scan play locates and plays the first 10 sec-
onds of each track on a disc automatically. This
function continues on the disc until it is cancelled.
∗
The scan play is useful when you want to select a
desired track.
1. Press the [SCN] button to start scan play.
“SCN” lights in the display.
2. To cancel the scan play, press the [SCN] but-
ton again. “SCN” goes off from the display
and the current track continues to play.
Repeat play
The repeat play continuously plays the current
track. This function continues automatically until
it is cancelled.
1. Press the [RPT] button. “RPT” lights in the dis-
play and the current track is repeated.
2. To cancel the repeat play, press the [RPT] but-
ton again. “RPT” goes off from the display and
normal play resumes.
Random play
The random play selects and plays individual tracks
on a disc in no particular order. This function con-
tinues automatically until it is cancelled.
1. Press the [RDM] button. “RDM” lights in the
display, an individual track is selected ran-
domly and play begins.
2. To cancel the random play, press the [RDM]
button again. “RDM” goes off and normal play
resumes.