Caldera SSK365NG-C - Manual (Page 4)

Electrical Requirements
Important Safety Instructions
Your gas cook top must be connected to a properly grounded 110
volt AC 60 Hz, 15 amp's electrical service and installed by a
qualified installer. It is the personal responsibility and obligation of
the customer to contact a qualified electrician/installer and have
the unit connected to a properly grounded circuit in accordance
with local codes of your area or, if there are no codes, the
following Electrical Code apply, In the U.S: -ANSI/NFPA 70-
(Latest Edition) must be followed. Copies are available by writing:
National Fire Protection Association
Battery Match Park
Quincy MA 02269
In Canada: -CAN/CSA-C. 22. 1, Canadian Electrical Code,
Part 1. Copies are available by writing:
CSA
178 Rexdale Boulevard
Toronto, Ontario,
CANADA, M9W 1 R3
As with all appliances there are certain rules to follow for safe
operation. Make sure everyone who operates this gas cook top is
familiar with the operation and with the following precautions.
It is the personal responsibility and obligation of the customer to
contract a qualified installer and have the unit connected properly
in accordance with local codes or, in the absence of local codes;
you will follow for the U.S. the National Fuel Gas Code, ANSI
Z223.1 - Latest Edition or for CANADA, CSA-Bl49.1 Natural Gas
and Propane Installation Code. The gas cook top must be
connected to the proper gas supply and checked for leaks.
3