SoundMax SM-CMD2026 - Manual (Page 6)

6
Attaching the control panel
1. Insert the right side of the control panel (pic. 1, A) into the
shaft of the main unit (pic. 1, B).
2. Push the panel to the right and insert the left side of it (pic.
2).
Note: the control panel must be attached into the T-Joint.
3. Press the top side of the panel until a click sound is heard
(pic. 3).
Detaching the front panel
1. Press the REL button on the front panel. The panel will go down.
2. Push the panel to the right and pull it towards you.
Caution:
The control panel can easily be damaged by shocks. After removing it, place it in a protective case and be
careful not to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely important part. Be
careful not to damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty, wipe off the dirt with soft, dry cloth only. And use a cotton swab soaked in
isopropyl alcohol to clean the socket on the back of the control panel.
Pic. 1 Pic. 2
Pic. 3