Т³гж 8, Technical specification, Elder/ 3/mu8 – OmniSistem Beta 3 – MU8 User Manual
Page 8

80Hz-20kHz
94dB
140W (RMS)
280W (MUSIC)
560W (PEAK)
8 ohms
90
90
NL4 2
280 262 380mm
(11.0 10.3 15.0in)
115dB/121dB(PEAK)
70Hz-20kHz
1.5kHz
8kg(17.6 lb)
9kg(19.8 lb)
1
2
3
4
340 320 460mm
(13.4 15.6 18.1in)
20000
10000
1000
100
50
20
70
40
7
4
70
80
90
100
110
S
e
n
s
it
iv
it
y
(
d
B
)
Im
p
e
d
a
n
c
e
(
O
h
m
s
)
7
MU8
60
Frequency (Hz)
/
/
8
11
ELDER/
3/MU8
13
23
Speaker Testing Method
1. Frequency response
Use Pink noise to test the speaker in the anechoic room, adjust the
level to make the speaker work at its rated impedance and the power
output is 1W, then test the frequency response 1m away from the
speaker.
2. Sensitivity
Use full range Pink noise which was modified by EQ curve to test the
speaker in the anechoic room, enlarge the signal to make the speaker
work at its rated impedance and the power output is 1W, then test
the sensitivity 1m away from the speaker.
3. MAX.SPL
Use full range Pink noise which was modified by EQ curve to test the
speaker in the anechoic room, enlarge the signal to make the speaker
work at its instant power output level, then test the SPL 1m away
from the speaker.
4. Rated Power
Use the pink noise according to IEC#268-5 to test the speaker, enlarge
the signal for continuous 100hours, the rated Power is the power when
the speaker will not incur hot damage or mechanics damage.
2
Wooden handle
Specification
Frequency response curve
Impedance curve
Frequency response curve & Impedance curve
Wedge shape
Polyurethane-based painting.
Steel grille is coated by powder to
provide strong ultra-Weatherability.
Sensitivity
(1W@1m):
Power:
Dispersion
H
V :
N.W.(Pcs):
System:
Frequency response(-3dB):
Frequency response(-10dB):
Max.SPL(1m):
Rated impedance:
Crossover point:
Cabinet:
Handle:
Surface:
Connector:
G.W.(Pcs):
Cabinet dimension:
(W D H)
Package dimension:
(W D H)
TECHNICAL SPECIFICATION
MU series professional loudspeaker system
Installation:
Full range passive speaker
1X1.4" compression driver
1X8" woofer
Tweeter:
Woofer:
support flange,
three mounting points
speaker stand
Optional accessory: