Hyundai H-CDM8030 User Manual
Page 21
21
Note:
USB format supports 2.0.
Capacity: 8 MB ~ 1 GB.
SD cards brands: Cannon, Fuji film, Palm, Motorola, Microsoft, IBM, HP, Compaq, Sharp, Samsung, etc.
Capacity: 8 MB ~ 1 GB.
MMC cards brands: Ericsson, Nokia, Motorola, HP, Palm, Sanyo, Microsystems, etc.
Capacity: 16 MB ~ 1 GB.
Playing/ pausing
When the disc/ card/ USB device has been already loaded or there are any tracks in the internal flash memory
(NAND) the playback of the first track starts automatically (you can enter any of these modes by pressing the
MODE button).
To ensure good system performance, wait until the unit finishes reading the disc information before proceeding.
Press the PAUSE button to pause the playback. Press again to resume the playback.
Playing the previous/ next track
1. During playback press the T-DN button on the panel or
button on RC to play the previous track.
2. Press the T-UP button on the panel or
button on RC to play the next track.
3. Press the 5 (-10), 6 (+10) buttons to play the 10 track down/ up.
Inserting the number of track
1. Press the number buttons to input the desired tracks.
2. Use the 5 (-10) button to go backward to the tenth track before the current track, for example: current track is
32. Press 5 (-10) to go to No.30 track.
Use the 6 (+10) button to go forward to the tenth track after the current track, for example: current track is 32.
Press 6 (+10) to go to No. 40 track.