NOYAFA NF-801R - Manual (Page 7)

Note: The equipment is prohibited to
be used on heavy-current wires
It can take place of
cable tester
Support direct wire collation
of operating switch
Replace the above
tester in cabling
It can rapidly test open circuit/short
circuit and crossing through the 18
status indicators. which is accurate
and clear.
Network wire Collation function
1. Insert the two ends of the network
wire into Rj45 port emitter and receiver.
2. Push function switchover button on
emitter to the position of “TEST ”,
testing indicator “VERIFY” flashes
meaning normal work of emitter.
3. According to 18 indicators, judge
the characteristics of short-circuit,
breaking circuit, open circuit and
crossing.
4.During testing, function switchover button can be pressed for switchover
of fast and slow levels.
Your excellent helper in cable test! 05