NOYAFA NF-8108 - Manual (Page 8)

NetWork
Cable Tester
1.wiremap
2.pair&length
3.coax/tel
4.setup
Product operation methods
Start and display:
Carry out self-checking at the same time (The dotted line
dynamically displays the course of self-checking from left to right):
Wait 5 seconds or push any key to display main menu.
Main menu display:
Wiring diagram (WIREMAP) test function:
After entering the wiring diagram (WIREMAP) test function,
the tester shall carry out wiring diagram (WIREMAP) test and
displays as follows while checking is being undertaken:
There are four functions to be chosen on main menu.
1. WireMap --- Wiring diagram measurement to check end-to-end
con-tinuity of cables M, L, R and locate error.
2. Pair & Length---Pair and measure length to verify cable length,
open circuit, pairing .
3. Coax/Tel---Coaxial cable measurement to check continuity
and indicate open and short circuit.
4. SETUP---Calibrate and length of cable.
----T e s t i n g ----
12345678...
Your excellent helper in cable test! 05