beautypg.com

NORAC 5465BC-JD-LP User Manual

Page 14

background image



11

6.2

Installation with 3-way Coupler and Terminator Plug

1. Remove the terminator plug (E20) from the existing 3-way coupler installed at the outer

sensor.

2. Install the 3-way coupler (E10) at the inner sensor. Plug the terminator plug (E20) and the

sensor cable into the 3-way coupler.

3. Connect the CANbus cable (C06) between the 3-way couplers.

Only the components shown in black are included in this kit.

Figure 8: Electrical Installation: 3-way Coupler and Terminator Plug