NORAC ECHO-DT1 - Manual (Page 4)

2
1 Introduction
The ECHO™ Display Kit Manual is intended to be used in conjunction with the UC5™ Spray
Height Control Installation Manual. This manual provides instructions to interface the UC5
Control Module to the ECHO Display. For installation of the rest of the UC5 Spray Height
Control System please refer to the sprayer specific manual provided with the kit.
Your input can help make us better! If you find issues or have suggestions regarding the parts
list or the installation procedure, please don’t hesitate to contact us.
1.1 List of Parts
Item Part Number Name Quantity
C01 43220-01 CABLE UC5 NETWORK 14 AWG 1M 2
D01 43700 UC5 ECHO DISPLAY PANEL 1
E20 43764T UC5 NETWORK COUPLER 2-WAY WITH TERMINATOR 2
M01 UC5-BC-MANUAL-ECHO_VT MANUAL UC5 OPERATORS - ECHO/VT 1
M04 ECHO-DT1-INST MANUAL UC5 ECHO TERMINAL DISPLAY KIT 1
If this kit is being installed with an existing system with control module serial
number lower than 3200, the following cable is required:
Item Part Number Name Quantity
C30 43250-17 CABLE UC5 POWER RETROFIT FOR ECHO SWITCH FUSED 1
1.2 Optional RAM Mount Ordering Information
This is an optional suction cup mount that may be useful when mounting the ECHO display.
This mount is not supplied with this kit, but can be ordered as per the following information:
To order from NORAC: • Contact us at any of the numbers above.
• Part number - 106332
To order from RAM:
• Go to www.ram-mount.com or visit your local RAM dealer.
• Part number - RAM-B-224-1U