beautypg.com

2 valve block mounting – NORAC UC5-BC-AP03 User Manual

Page 27

background image



24

10.2 Valve Block Mounting

1. A suitable mounting location for the valve block is illustrated in Figure 27.

2. Insert the threaded rod into the block and use a hex nut to hold the rod. The block holes

are 3/8” NC-1” deep. If bolts are used instead of the threaded rod, ensure the bolts thread
in at least 3/8”.

3. Use the remaining hardware to secure the block to the sprayer.

4. Cut off excess threaded rod, if necessary.



Figure 27: Valve Block Mounting

Valve Block and

Valve Module

See also other documents in the category NORAC Gardening equipment: