NORAC UC4.5-BC-MC1 - Manual (Page 16)

13
6.2 Roll Sensor Mounting Guidelines: Trapeze-Suspended Booms
1. When mounting the roll sensors, mount a roll sensor without the temperature probe
(E04) with the lowest serial number on the trapeze link (boom frame), a roll sensor
without the temperature probe (E04) with the highest serial number on the chassis
(reference frame), and the roll sensor with the temperature probe (E03) on the boom
carrier frame (intermediate frame). For optimal performance, minimize the distance from
the boom frame roll sensor to the pivot point (A) and minimize the vertical distance
between the chassis roll sensor and the pivot point (B).
Figure 12: Roll Sensor Mounting on a Trapeze Suspended Boom
Figure 13: Intermediate and Boom Frame Roll Sensor Mounting
Intermediate Frame
Roll Sensor
Boom Frame
Roll Sensor